Is Logan Tap Water Safe to Drink?

Can You Drink Tap Water in Logan?

No, Logan's tap water is not safe to drink as it has an active health based violation of the Safe Drinking Water Act (SDWA). Other factors such as lead piping in a home, or low levels of pollutants on immunocompromised individuals, should also be considered, however. To find more recent info we might have, you can check out our boil water notice page or the city's water provider website.

According the EPA’s ECHO database, from April 30, 2019 to June 30, 2022, Logan's water utility, City of Logan Water Board, had 1 health-based violations and 27 non-health-based violations of the Safe Drinking Water Act. For more details on the violations, please see our violation history section below. The last violation for Logan was resolved on Aug. 31, 2021. There has been an active violation for Public Notice since Jan. 27, 2012. This assessment is based on the City of Logan Water Board water system, other water systems in the city may have different results.

While tap water that meets the EPA health guidelines generally won’t make you sick to your stomach, it can still contain regulated and unregulated contaminants present in trace amounts that could potentially cause health issues over the long-run. These trace contaminants may also impact immunocompromised and vulnerable individuals.

The EPA is reviewing if it’s current regulations around pollutant levels in tap water are strict enough, and the health dangers posed by unregulated pollutants, like PFAS.

Logan Tap Water Safe Drinking Water Act Violation History - Prior 10 Years

Below is a ten year history of violations for the water system named City of Logan Water Board for Logan in West Virginia. For more details please see the "What do these Violations Mean?" section below.

From Sept. 1, 2021 to Nov. 30, 2021, Logan had 2 non-health based Safe Drinking Water Act violations with the violation category being Monitoring and Reporting, more specifically, the violation code was Monitoring and Reporting (DBP) which falls into the Disinfectants and Disinfection Byproducts Rule rule code group, and the Stage 2 Disinfectants and Disinfection Byproducts Rule rule code family for the following contaminant codes: TTHM, Total Haloacetic Acids (HAA5).

From Aug. 1, 2021 to Aug. 31, 2021, Logan had 1 non-health based Safe Drinking Water Act violation with the violation category being Monitoring and Reporting, more specifically, the violation code was Monitoring of Treatment (SWTR-Filter) which falls into the Microbials rule code group, and the Surface Water Treatment Rules rule code family for the following contaminant code: Surface Water Treatment Rule.

From Aug. 1, 2021 to Aug. 31, 2021, Logan had 1 non-health based Safe Drinking Water Act violation with the violation category being Monitoring and Reporting, more specifically, the violation code was Monitoring, Turbidity (Enhanced SWTR) which falls into the Microbials rule code group, and the Surface Water Treatment Rules rule code family for the following contaminant code: Interim Enhanced Surface Water Treatment Rule.

From Nov. 1, 2020 to Nov. 30, 2020, Logan had 1 non-health based Safe Drinking Water Act violation with the violation category being Monitoring and Reporting, more specifically, the violation code was Monitoring of Treatment (SWTR-Filter) which falls into the Microbials rule code group, and the Surface Water Treatment Rules rule code family for the following contaminant code: Surface Water Treatment Rule.

From Nov. 1, 2020 to Nov. 30, 2020, Logan had 1 non-health based Safe Drinking Water Act violation with the violation category being Monitoring and Reporting, more specifically, the violation code was Monitoring, Turbidity (Enhanced SWTR) which falls into the Microbials rule code group, and the Surface Water Treatment Rules rule code family for the following contaminant code: Interim Enhanced Surface Water Treatment Rule.

From Jan. 1, 2020 to Dec. 31, 2020, Logan had 21 non-health based Safe Drinking Water Act violations with the violation category being Monitoring and Reporting, more specifically, the violation code was Monitoring, Regular which falls into the Chemicals rule code group, and the Volatile Organic Chemicals rule code family for the following contaminant codes: 1,2,4-Trichlorobenzene, cis-1,2-Dichloroethylene, Xylenes, Total, o-Dichlorobenzene, p-Dichlorobenzene, 1,1-Dichloroethylene, trans-1,2-Dichloroethylene, 1,2-Dichloroethane, 1,1,1-Trichloroethane, 1,2-Dichloropropane, Trichloroethylene, 1,1,2-Trichloroethane, Tetrachloroethylene, Benzene, Toluene, Ethylbenzene, Styrene, DICHLOROMETHANE, Carbon tetrachloride, Vinyl chloride, CHLOROBENZENE.

For the compliance period beginning June 2, 2019, Logan had 1 health-based Safe Drinking Water Act violation with the violation category being Treatment Technique Violation, more specifically, the violation code was Failure To Address Deficiency which falls into the Microbials rule code group, and the Surface Water Treatment Rules rule code family for the following contaminant code: Long Term 2 Enhanced Surface Water Treatment Rule.

For the compliance period beginning Nov. 2, 2017, Logan had 1 health-based Safe Drinking Water Act violation with the violation category being Treatment Technique Violation, more specifically, the violation code was Failure To Address Deficiency which falls into the Microbials rule code group, and the Surface Water Treatment Rules rule code family for the following contaminant code: Long Term 2 Enhanced Surface Water Treatment Rule.

For the compliance period beginning March 18, 2017, Logan had 1 non-health based Safe Drinking Water Act violation with the violation category being Other Violation, more specifically, the violation code was Failure to Consult with State which falls into the Microbials rule code group, and the Surface Water Treatment Rules rule code family for the following contaminant code: Long Term 2 Enhanced Surface Water Treatment Rule.

For the compliance period beginning Jan. 1, 2017, Logan had 1 non-health based Safe Drinking Water Act violation with the violation category being Monitoring and Reporting, more specifically, the violation code was Lead Consumer Notice which falls into the Chemicals rule code group, and the Lead and Copper Rule rule code family for the following contaminant code: Lead and Copper Rule.

For the compliance period beginning Feb. 14, 2015, Logan had 1 non-health based Safe Drinking Water Act violation with the violation category being Other Violation, more specifically, the violation code was Public Notification Violation for NPDWR Violation which falls into the Other rule code group, and the Public Notice Rule rule code family for the following contaminant code: Public Notice.

For the compliance period beginning July 1, 2014, Logan had 1 non-health based Safe Drinking Water Act violation with the violation category being Other Violation, more specifically, the violation code was Consumer Confidence Report Complete Failure to Report which falls into the Other rule code group, and the Consumer Confidence Rule rule code family for the following contaminant code: Consumer Confidence Rule.

For the compliance period beginning Dec. 30, 2013, Logan had 1 non-health based Safe Drinking Water Act violation with the violation category being Monitoring and Reporting, more specifically, the violation code was Lead Consumer Notice which falls into the Chemicals rule code group, and the Lead and Copper Rule rule code family for the following contaminant code: Lead and Copper Rule.

From Jan. 1, 2013 to Dec. 31, 2013, Logan had 21 non-health based Safe Drinking Water Act violations with the violation category being Monitoring and Reporting, more specifically, the violation code was Monitoring, Regular which falls into the Chemicals rule code group, and the Volatile Organic Chemicals rule code family for the following contaminant codes: Xylenes, Total, DICHLOROMETHANE, p-Dichlorobenzene, Vinyl chloride, 1,1-Dichloroethylene, trans-1,2-Dichloroethylene, 1,2-Dichloroethane, 1,1,1-Trichloroethane, Trichloroethylene, 1,1,2-Trichloroethane, Tetrachloroethylene, Benzene, Toluene, Styrene, Carbon tetrachloride, o-Dichlorobenzene, cis-1,2-Dichloroethylene, Ethylbenzene, CHLOROBENZENE, 1,2,4-Trichlorobenzene, 1,2-Dichloropropane.

For the compliance period beginning July 1, 2012, Logan had 1 non-health based Safe Drinking Water Act violation with the violation category being Other Violation, more specifically, the violation code was Consumer Confidence Report Complete Failure to Report which falls into the Other rule code group, and the Consumer Confidence Rule rule code family for the following contaminant code: Consumer Confidence Rule.

From July 1, 2012 to Sept. 30, 2012, Logan had 2 non-health based Safe Drinking Water Act violations with the violation category being Monitoring and Reporting, more specifically, the violation code was Monitoring and Reporting (DBP) which falls into the Disinfectants and Disinfection Byproducts Rule rule code group, and the Stage 1 Disinfectants and Disinfection Byproducts Rule rule code family for the following contaminant codes: Total Haloacetic Acids (HAA5), TTHM.

For the compliance period beginning Jan. 27, 2012, Logan had 1 non-health based Safe Drinking Water Act violation with the violation category being Other Violation, more specifically, the violation code was Public Notification Violation for NPDWR Violation which falls into the Other rule code group, and the Public Notice Rule rule code family for the following contaminant code: Public Notice.

Is there Lead in Logan Water?

Based on the EPA’s ECHO Database, 90% of the samples taken from the Logan water system, City of Logan Water Board, between sample start date and sample end date, were at or below, 0.001 mg/L of lead in Logan water. This is 6.7% of the 0.015 mg/L action level. This means 10% of the samples taken from Logan contained more lead.

While Logan water testing may have found 0.001 mg/L of lead in its water, that does not mean your water source has the same amount. The amount of lead in water in a city can vary greatly from neighborhood to neighborhood, or even building to building. Many buildings, particularly older ones, have lead pipes or service lines which can be a source of contamination. To find out if your home has lead, we recommend getting you water tested.

No amount of lead in water is healthy, only less dangerous. As lead accumulates in our bodies over time, even exposure to relatively small amounts can have negative health effects. For more information, please check out our Lead FAQ page.

Are there PFAS in Logan Tap Water?

Currently, testing tap water for PFAS isn’t mandated on a national level. We do have a list of military bases where there have been suspected or confirmed leaks. There appears to be no military bases near Logan with suspected leaks.

With many potential sources of PFAS in tap water across the US, the best information we currently have about which cities have PFAS in their water is this ewg map, which you can check to see if Logan has been evaluated for yet.

Our stance is better safe than sorry, and that it makes sense to try to purify the tap water just in case.

Logan SDWA Violation History Table - Prior 10 Years

What do these Violations Mean?

Safe Drinking Water Act Violations categories split into two groups, health based, and non-health based. Generally, health based violations are more serious, though non-health based violations can also be cause for concern.

Health Based Violations

1. Maximum contaminant levels (MCLs) - maximum allowed contaminant level was exceeded.
2. Maximum residual disinfectant levels (MRDLs) - maximum allowed disinfectant level was exceeded.
3. Other violations (Other) - the exact required process to reduce the amounts of contaminants in drinking water was not followed.

Non-Health Based Violations

1. Monitoring and reporting violations (MR, MON) - failure to conduct the required regular monitoring of drinking water quality, and/or to submit monitoring results on time.
2. Public notice violations (Other) - failure to immediately alert consumers if there is a serious problem with their drinking water that may pose a risk to public health.
3. Other violations (Other) - miscellaneous violations, such as failure to issue annual consumer confidence reports or maintain required records.

SDWA Table Key

For more clarification please visit the EPA's data dictionary.