Layer 1

Is Mentor Tap Water Safe to Drink?

Yes! Generally Safe to Drink*

LAST UPDATED: 7:48 pm, July 30, 2022
+

Table of Contents

Can You Drink Tap Water in Mentor?

Yes, Mentor's tap water is generally considered safe to drink as Mentor has no active health based violations of the Safe Drinking Water Act (SDWA) that we are aware of. Other factors such as lead piping in a home, or low levels of pollutants on immunocompromised individuals, should also be considered, however. To find more recent info we might have, you can check out our boil water notice page, the city's water provider website, or Mentor's local Twitter account.

According the EPA’s ECHO database, from April 30, 2019 to June 30, 2022, Mentor's water utility, Aqua Ohio - Mentor, had 0 violations of the Safe Drinking Water Act. For more details on the violations, please see our violation history section below. This assessment is based on the Aqua Ohio - Mentor water system, other water systems in the city may have different results.

While tap water that meets the EPA health guidelines generally won’t make you sick to your stomach, it can still contain regulated and unregulated contaminants present in trace amounts that could potentially cause health issues over the long-run. These trace contaminants may also impact immunocompromised and vulnerable individuals.

The EPA is reviewing if it’s current regulations around pollutant levels in tap water are strict enough, and the health dangers posed by unregulated pollutants, like PFAS.

Water Quality Report for Mentor Tap Water

The most recent publicly available numbers for measured contaminant levels in Mentor tap water are in its 2020 Water Quality Report. As you can see, there are levels which the EPA considers to be acceptable, but being below the maximum allowable level doesn’t necessarily mean the water is healthy.

Lead in tap water, for example, is currently allowed at up to 15ppb by the EPA, but it has set the ideal goal for lead at zero. This highlights how meeting EPA standards doesn’t necessarily mean local tap water is healthy.

EPA regulations continue to change as it evaluates the long term impacts of chemicals and updates drinking water acceptable levels. The rules around arsenic, as well as, lead and copper are currently being re-evaluated.

There are also a number of "emerging" contaminants that are not currently. For example, PFAS (Per- and polyfluoroalkyl substances), for which the EPA has issued a health advisory. PFAS are called "forever chemicals" since they tend not to break down in the environment or the human body and can accumulate over time.

We recommend looking at the contaminants present in Mentor's water quality reports, or getting your home's tap water tested to see if you should be filtering your water.

Mentor Tap Water Safe Drinking Water Act Violation History - Prior 10 Years

Below is a ten year history of violations for the water system named Aqua Ohio - Mentor for Mentor in Ohio. For more details please see the "What do these Violations Mean?" section below.

Is there Lead in Mentor Water?

Based on the EPA’s ECHO Database, 90% of the samples taken from the Mentor water system, Aqua Ohio - Mentor, between sample start date and sample end date, were at or below, 0.0 mg/L of lead in Mentor water. This is 0% of the 0.015 mg/L action level. This means 10% of the samples taken from Mentor contained more lead.

While Mentor water testing may have found 0.0 mg/L of lead in its water, that does not mean your water source has the same amount. The amount of lead in water in a city can vary greatly from neighborhood to neighborhood, or even building to building. Many buildings, particularly older ones, have lead pipes or service lines which can be a source of contamination. To find out if your home has lead, we recommend getting you water tested.

No amount of lead in water is healthy, only less dangerous. As lead accumulates in our bodies over time, even exposure to relatively small amounts can have negative health effects. For more information, please check out our Lead FAQ page.

Are there PFAS in Mentor Tap Water?

Currently, testing tap water for PFAS isn’t mandated on a national level. We do have a list of military bases where there have been suspected or confirmed leaks. There appears to be at least one military base - Camp Ravenna - near Mentor with suspected leaks.

With many potential sources of PFAS in tap water across the US, the best information we currently have about which cities have PFAS in their water is this ewg map, which you can check to see if Mentor has been evaluated for yet.

Our stance is better safe than sorry, and that it makes sense to try to purify the tap water just in case.

What do these Violations Mean?

Safe Drinking Water Act Violations categories split into two groups, health based, and non-health based. Generally, health based violations are more serious, though non-health based violations can also be cause for concern.

Health Based Violations

  1. Maximum contaminant levels (MCLs) - maximum allowed contaminant level was exceeded.
  2. Maximum residual disinfectant levels (MRDLs) - maximum allowed disinfectant level was exceeded.
  3. Other violations (Other) - the exact required process to reduce the amounts of contaminants in drinking water was not followed.

Non-Health Based Violations

  1. Monitoring and reporting violations (MR, MON) - failure to conduct the required regular monitoring of drinking water quality, and/or to submit monitoring results on time.
  2. Public notice violations (Other) - failure to immediately alert consumers if there is a serious problem with their drinking water that may pose a risk to public health.
  3. Other violations (Other) - miscellaneous violations, such as failure to issue annual consumer confidence reports or maintain required records.

SDWA Table Key

Field Description
Compliance Period Dates of the compliance period.
Status Current status of the violation.
  • Resolved - The violation has at least one resolving enforcement action. In SDWIS, this indicates that either the system has returned to compliance from the violation, the rule that was violated was no longer applicable, or no further action was needed.
  • Archived - The violation is not Resolved, but is more than five years past its compliance period end date. In keeping with the Enforcement Response Policy, the violation no longer contributes to the public water system's overall compliance status. Unresolved violations are also marked as Archived when a system ceases operations (becomes inactive).
  • Addressed - The violation is not Resolved or Archived, and is addressed by one or more formal enforcement actions.
  • Unaddressed - The violation is not Resolved or Archived, and has not been addressed by formal enforcement.
show details
Health-Based? Whether the violation is health based.
Category Code
The category of violation that is reported.
  • TT - Treatment Technique Violation
  • MRDL - Maximum Residual Disinfectant Level
  • Other - Other Violation
  • MCL - Maximum Contaminant Level Violation
  • MR - Monitoring and Reporting
  • MON - Monitoring Violation
  • RPT - Reporting Violation
show details
Code A full description of violation codes can be accessed in the SDWA_REF_CODE_VALUES (CSV) table.
Contaminant Code A code value that represents a contaminant for which a public water system has incurred a violation of a primary drinking water regulation.
Rule Code Code for a National Drinking Water rule.
  • 110 - Total Coliform Rule
  • 121 - Surface Water Treatment Rule
  • 122 - Long Term 1 Enhanced Surface Water Treatment Rule
  • 123 - Long Term 2 Enhanced Surface Water Treatment Rule
  • 130 - Filter Backwash Rule
  • 140 - Ground Water Rule
  • 210 - Stage 1 Disinfectants and Disinfection Byproducts Rule
  • 220 - Stage 2 Disinfectants and Disinfection Byproducts Rule
  • 230 - Total Trihalomethanes
  • 310 - Volatile Organic Chemicals
  • 331 - Nitrates
  • 332 - Arsenic
  • 333 - Inorganic Chemicals
  • 320 - Synthetic Organic Chemicals
  • 340 - Radionuclides
  • 350 - Lead and Copper Rule
  • 410 - Public Notice Rule
  • 420 - Consumer Confidence Rule
  • 430 - Miscellaneous
  • 500 - Not Regulated
  • 111 - Revised Total Coliform Rule
show details
Rule Group Code Code that uniquely identifies a rule group.
  • 120 - Surface Water Treatment Rules
  • 130 - Filter Backwash Rule
  • 140 - Groundwater Rule
  • 210 - Stage 1 Disinfectants and Disinfection Byproducts Rule
  • 220 - Stage 2 Disinfectants and Disinfection Byproducts Rule
  • 230 - Total Trihalomethanes
  • 310 - Volatile Organic Chemicals
  • 320 - Synthetic Organic Chemicals
  • 330 - Inorganic Chemicals
  • 340 - Radionuclides
  • 350 - Lead and Copper Rule
  • 400 - Other
  • 500 - Not Regulated
  • 110 - Total Coliform Rules
  • 410 - Public Notice Rule
  • 420 - Consumer Confidence Rule
  • 430 - Miscellaneous
show details
Rule Family Code Code for rule family.
  • 100 - Microbials
  • 200 - Disinfectants and Disinfection Byproducts Rule
  • 300 - Chemicals
  • 400 - Other
  • 500 - Not Regulated
show details

For more clarification please visit the EPA's data dictionary.

Mentor Water - Frequently Asked Questions

HOW DO I CONTACT MENTOR CUSTOMER SERVICE?
To contact customer service for the Mentor water provider, Aqua Ohio - Mentor, please use the information below.
By Mail: 8644 STATION ST
MENTOR, OH, 44060
HOW TO PAY BILL FOR AQUA OHIO - MENTOR
Already have an account?

Existing customers can login to their Aqua Ohio - Mentor account to pay their Mentor water bill by clicking here.

Want to create a new account?

If you want to pay your Aqua Ohio - Mentor bill online and haven't made an account yet, you can create an account online. Please click here to create your account to pay your Mentor water bill.

Want to pay without an account?

If you don't want to make an account, or can't remember your account, you can make a one-time payment towards your Mentor water bill without creating an account using a one time payment portal with your account number and credit or debit card. Click here to make a one time payment.

HOW TO START & STOP MENTOR WATER SERVICE
Starting Your Service

Moving to a new house or apartment in Mentor means you will often need to put the water in your name with Aqua Ohio - Mentor. In order to put the water in your name, please click the link to the start service form below. Start service requests for water bills typically take two business days.

Start Service Form

Want to create a new account?

Leaving your house or apartment in Mentor means you will likely need to take your name off of the water bill with Aqua Ohio - Mentor. In order to take your name off the water bill, please click the link to the stop service form below. Stop service for water bills requests typically take two business days.

Stop Service Form

USER SUBMITTED RATINGS

Mentor tap water
  • Drinking Water Pollution and Inaccessibility 27% Low
  • Water Pollution 43% Moderate
  • Drinking Water Quality and Accessibility 73% High
  • Water Quality 57% Moderate

The above data is comprised of subjective, user submitted opinions about the water quality and pollution in Mentor, measured on a scale from 0% (lowest) to 100% (highest).

Related FAQS

Mentor Water Quality Report (Consumer Confidence Report)

The EPA mandates that towns and cities consistently monitor and test their tap water. They must report their findings in an annual Consumer Confidence Report. Below is the most recent water quality report from Mentor's Water. If you would like to see the original version of the report, please click here.

Lake Shore Division – Lake County 2020 Water Quality Report*

PWSID # OH4301511

Este informe contiene información muy importante sobre su agua de beber.

Tradúzcalo o hable con alguien que lo entienda bien.

A Message to Our Valued Customers

As the new President of Aqua Ohio, I’m taking this opportunity to introduce myself and share with you important information about the quality of water we deliver to you and nearby homes and businesses. I also want to thank you for taking a few minutes to review our 2020 Consumer Confidence Report (CCR).

With more than 35 years in the industry, starting as plant operator and working to become the Utility Director of several Ohio municipalities including, most recently, for the City of Cleveland, I’ve worked with many water and wastewater professionals. I can say, with confidence, that Aqua Ohio is impressively focused on investing in the systems that serve our customers and is committed to the core values of integrity, respect and the pursuit of excellence. These are qualities you, the customer, may not witness every day but I hope you appreciate our employees' commitment to providing you with safe, reliable water.

This year, as we begin to lift COVID-19 restrictions and return to a more normal life in our communities, health and safety remain Aqua’s focus. Every day, our EPA-certified technicians conduct hundreds of tests and treat water to protect you from harmful bacteria, viruses and other contaminants, all for about a penny a gallon.

State and Federal regulations require immediate public notification about critical events or contaminants in water systems. This CCR, produced annually for the previous year, serves as a summary of the characteristics of the water we supply to your tap. The results herein are evidence of our dedication to Aqua’s core values.

Pursuing excellence isn’t limited to the areas of quality and safety; we’re also dedicated to providing reliable service. That reliability requires ongoing investment in our treatment and delivery systems including pumps, pipes and valves that need continual maintenance and occasional replacement. We continually evaluate each system’s performance, and invest in areas with the greatest need. In fact, since 2012 AND 2020, Aqua invested nearly $287 million in Ohio water systems to maintain reliability, ensure regulatory compliance and replace aging infrastructure.

We hope that this level of investment helps build understanding when it comes to our commitment to bringing you safe, reliable water. The water quality results summarized in this report, combined with our system investments should give you confidence that we’re striving every day to deliver reliable water service that meets all EPA requirements for health and safety at a reasonable price.

For more information or for additional copies of this report, please contact our customer service center at 877.987.2782. You can also view an electronic version of this report on our website.

Sincerely,

Robert “Bob” Davis, President

OH4301511

About Your Drinking Water -- Aqua Ohio, Inc. (Aqua) is pleased to provide you with its 2020 Consumer Confidence Report for the Lake Shore Division – Lake County water system (public water supply ID-OH4301511), which contains important information about your drinking water. The report summarizes the quality of water Aqua provided in 2020 - including details about water sources, what the water at your tap contains, and how it compares to standards set by regulatory agencies. We have a current, unconditional license to operate our water system. Although the report lists only those regulated substances that were detected in your water, we test for more than what is reported. This report is only a summary of our activities during 2020. If you have any questions about the information in this report, please call 877.987.2782 or visit our website at AquaAmerica.com.

Aqua Ohio does not hold regular public meetings on consumers’ drinking water quality. However, you can call Aqua Ohio (877.987.2782); the Public Utilities Commission of Ohio (800.686.7826) or the Office of Ohio Consumers’ Counsel (877.742.5622) if you have a concern or inquiry about your drinking water quality.

Sources of Supply -- Water for the Lake Shore Division – Lake County comes from Lake Erie. For the purpose of source water assessments, in Ohio, all surface waters are considered to be susceptible to contamination. By their nature, surface waters are accessible and can be readily contaminated by chemicals and pathogens with relatively short travel times from source to intake. Although Aqua’s surface water intake is located offshore in Lake Erie, the proximity of several onshore sources increases the susceptibility of the source water to contamination. The Lake Shore Division – Lake County system’s drinking water source protection area is susceptible to contamination from municipal wastewater treatment discharges, runoff from residential, agricultural and urban areas, oil and gas production and transportation and accidents, releases and spills from vehicular traffic as well as from commercial shipping operations and recreational boating. Aqua treats the water to meet drinking water quality standards, but no single treatment technique can address all potential contaminants. The potential for water quality impacts can be further decreased by implementing measures to protect Lake Erie. More detailed information is provided in Aqua’s Lake Shore Division – Lake County water system Drinking Water Assessment report, which can be obtained by calling Aqua at 877.987.2782.

The sources of drinking water (tap water and bottled water) include rivers, lakes, streams, ponds, reservoirs, springs, and wells. As water travels over the surface of the land or through the ground, it dissolves naturally occurring minerals and radioactive material, and can pick up substances resulting from the presence of animals or from human activity.

Contaminants that may be present in source water include:

  • Microbial contaminants, such as viruses and bacteria, which may come from sewage treatment plants, septic systems, agricultural livestock operations, and wildlife.
  • Inorganic contaminants, such as salts and metals, which can be naturally occurring or result from urban storm runoff, industrial or domestic wastewater discharges, oil and gas production, mining, or farming.
  • Pesticides and herbicides, which may come from a variety of sources such as agriculture, stormwater runoff, and residential uses.
  • Organic chemical contaminants, including synthetic and volatile organics, are byproducts of industrial processes and petroleum production, and can also come from gas stations, urban stormwater runoff, and septic systems.
  • Radioactive contaminants, which can be naturally occurring or be the result of oil and gas production and mining activities.

In order to ensure that tap water is safe to drink, EPA prescribes regulations that limit the amount of certain contaminants in water provided by public water systems. FDA regulations establish limits for contaminants in bottled water, which must provide the same protection for public health.

Drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants. The presence of contaminants does not necessarily indicate that water poses a health risk. More information about contaminants and potential health effects can be obtained by calling the Environmental Protection Agency’s (EPA) Safe Drinking Water Hotline at 800.426.4791.

Some people may be more vulnerable to contaminants in drinking water than the general population. Immuno-compromised persons such as persons with cancer undergoing chemotherapy, persons who have undergone organ transplants, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be particularly at risk from infections. These people should seek advice about drinking water from their health care providers. EPA/CDC guidelines on appropriate means to lessen the risk of infection by Cryptosporidium and other microbial contaminants are available from the Safe Drinking Water Hotline at 800.426.4791.

Our water systems are designed and operated to deliver water to our customers’ plumbing systems that complies with state and federal drinking water standards. This water is disinfected using chlorine, but it is not necessarily sterile. Customers’ plumbing, including treatment devices, might remove, introduce or increase contaminants in tap water. All customers, and in particular operators of facilities like hotels and institutions serving susceptible populations (like hospitals and nursing homes), should properly operate and maintain the plumbing systems in these facilities. You can obtain additional information from the EPA's Safe Drinking Water Hotline at 800.426.4791.

OH4301511

Lake Shore Division – Lake County: PWSID # OH4301511

The following table lists contaminants that were detected during 2020 (unless otherwise noted) in your water system. The table provides the level found and the range of detections of regulated contaminants.

Contaminants

Level

Range of

MCL

MCLG

Sample

Violation

Major Sources in Drinking Water

Found

Detections

Date

Y/N

 

 

 

 

Total Chlorine, ppm

1.5

1.2 – 1.7

MRDL

MRDLG

2020

N

Water additive used to control

= 4

= 4

microbes

 

 

 

 

 

Turbidity, NTU (a)

0.11

0.04 - 0.11

TT

NA

2020

N

Soil runoff

 

 

 

 

 

 

 

 

Turbidity, % meeting plant

100.0%

100.0 - 100.0%

TT

NA

2020

N

Soil runoff

performance level

 

 

 

 

 

 

 

Total organic carbon,

 

 

 

 

 

 

1.0

0.6 – 1.4

1.00,

NA

2020

N

Naturally present in the environment

removal ratio (b)

 

 

TT

 

 

 

 

 

 

 

 

 

 

 

Inorganic Contaminants

 

 

 

 

 

 

 

Barium, ppm

0.02

NA

2

2

2020

N

Erosion of natural deposits

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Discharge from steel and

Chromium, ppb

0.95

NA

100

100

2020

N

pulp mills; erosion of natural

 

 

 

 

 

 

 

deposits

Fluoride, ppm

1.0

0.8 - 1.1

4

4

2020

N

Erosion of natural deposits; water

additive to promote strong teeth

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Runoff from fertilizer use; leaching

Nitrate, ppm

0.7

ND - 0.7

10

10

2020

N

from septic tanks, sewage; erosion

 

 

 

 

 

 

 

of natural deposits

Radiological Contaminants

 

 

 

 

 

 

 

Gross Alpha, pCi/L

0.66

NA

15

0

2015

N

Erosion of natural deposits

 

 

 

 

 

 

 

 

Combined Radium, pCi/L

0.13

NA

5

0

2015

N

Erosion of natural deposits

 

 

 

 

 

 

 

 

Disinfection Byproducts- For Haloacetic Acids (HAAs) and Trihalomethanes (TTHMs) the level found is the highest locational running annual average of the quarterly averages. Range of Results is the range of all test results (lowest to highest) at individual sampling sites.

Haloacetic acids, ppb

35

13 – 43

60

NA

2020

N

Byproduct of drinking water

 

 

 

 

 

 

 

Total Trihalomethanes, ppb

59

18 – 86

80

NA

2020

N

chlorination

 

 

 

 

 

 

 

 

 

Unregulated Contaminants

 

 

 

 

 

 

 

Bromodichloromethane,

7.1

NA

NA

NA

2020

N

 

ppb

 

 

 

 

 

 

 

Byproduct of drinking water

Chloroform, ppb

8.8

NA

NA

NA

2020

N

chlorination

 

 

 

 

 

 

 

Dibromochloromethane,

2.4

NA

NA

NA

2020

N

 

ppb

 

 

 

 

 

 

 

 

  1. Turbidity is a measure of the cloudiness of the water and is an indication of the effectiveness of the filtration process. The turbidity limit set by EPA is 0.3 NTU in 95% of the daily samples and shall not exceed 1 NTU at any time
  2. The value reported under "Level Found" is the lowest ratio between percentage of TOC actually removed to the percentage of TOC required to be removed. A value greater than or equal to 1.0 indicates that the water system is in compliance with TOC removal requirements. A value of less than 1.0 indicates a violation of TOC requirements.

Lead and Copper Results

 

 

 

 

 

 

OH4301511

 

 

 

 

 

 

 

 

 

Lead and

90th

Total

Samples

Action

 

Sample

Violation

Major Sources in

 

 

Number of

Exceeding

MCLG

 

 

Copper

Percentile

Level

Date

Y/N

Drinking Water

 

 

Samples

Action Level

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Copper, ppm

0.05

31

0

AL= 1.3

1.3

2020

N

Corrosion of household

 

 

Lead, ppb

ND

31

0

AL= 15

0

2020

N

plumbing

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

If present, elevated levels of lead can cause serious health problems, especially for pregnant women and young children. Lead in drinking water is primarily from materials and components associated with service lines and home plumbing. Lake Shore Division– Lake County water system is responsible for providing high quality drinking water but cannot control the variety of materials used in plumbing components. When your water has been sitting for several hours, you can minimize the potential for lead exposure by flushing your cold water tap for 30 seconds to 2 minutes before using water for drinking or cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize exposure is available from the Safe Drinking Water Hotline at 800.426.4791or at http://www.epa.gov/safewater/lead.

The 1996 amendments to the Safe Drinking Water Act (SDWA) require that once every 5 years, the U.S. Environmental Protection Agency (EPA) issue a new list of no more than 30 unregulated contaminants to be monitored by public water systems (PWS). The Unregulated Contaminant Monitoring Rule (UCMR) provides EPA and other interested parties with scientifically valid data on the occurrence of contaminants in drinking water. These data serve as a primary source of occurrence and exposure information that the agency uses to develop regulatory decisions. If a PWS monitoring for UCMR4 finds contaminants in its drinking water, it must provide the information to its customers in this annual water quality report. Below is a table of the results of our UCMR4 monitoring in 2019 and 2020. All other contaminants tested during UCMR4 were Not Detected.

Unregulated Contaminants Detected During 2019- 2020

Unregulated Contaminant

Average

Range of

MCL

Detection

Detections

 

 

Entry Point Samples

 

 

 

Manganese, ppb

0.23

ND - 0.85

NA

Distribution Samples

Haloacetic Acids (HAA5) (ppb)

32.25

44.97 - 12.31

NA

Haloacetic Acids (HAA9) (ppb)

45.02

63.39 - 20.24

NA

Haloacetic Acids (HAA6Br) (ppb)

12.93

19.19 - 7.93

NA

Notes:

Action Level (AL): The concentration of a contaminant which, if exceeded, triggers treatment or other requirements.

Maximum Contaminant Level (MCL): The highest level of a contaminant that is allowed in drinking water. MCLs are set as close to the MCLGs as feasible using the best available treatment technology.

Maximum Contaminant Level Goal (MCLG): The level of a contaminant in drinking water below which there is no known or expected risk to health. MCLGs allow for a margin of safety.

Maximum Residual Disinfectant Level (MRDL): The highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.

Maximum Residual Disinfectant Level Goal (MRDLG): The level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contaminants.

NA: Not applicable.

ND: Not detected.

NTU: Nephelometric turbidity unit (cloudiness of water).

ppb: A unit of concentration equal to one part per billion.

ppm: A unit of concentration equal to one part per million.

PWSID: Public water supply identification number.

Notes (Cont’d):

Total Organic Carbon: The level reported under “Level Found” for Total Organic Carbon (TOC) is the lowest ratio between percentage of TOC actually removed to the percentage of TOC required to be removed. A value greater than one indicates that the water system is in compliance with the TOC removal requirements. A value of less than one indicates a Treatment Technique violation of the TOC removal requirements.

Treatment Technique (TT): A required process intended to reduce the level of a contaminant in drinking water.

Turbidity: A measure of the cloudiness of water and is an indication of the effectiveness of our filtration system.

  • This consumer confidence report contains regulatorily required or recommended language, and nothing herein is, is intended as, nor should be construed as, a promise of or contract for payment or reimbursement of expenses incurred for any action you take on account of this consumer confidence report.

Contaminants


Aqua Ohio Inc. - Mentor

EWG's drinking water quality report shows results of tests conducted by the water utility and provided to the Environmental Working Group by the Ohio Environmental Protection Agency - Division of Drinking and Ground Waters, as well as information from the U.S. EPA Enforcement and Compliance History database (ECHO). For the latest quarter assessed by the U.S. EPA (January 2019 - March 2019), tap water provided by this water utility was in compliance with federal health-based drinking water standards.

Utility details

  • Serves: 83000
  • Data available: 2012-2017
  • Data Source: Surface water
  • Total: 21

Contaminants That Exceed Guidelines

  • Bromodichloromethane
  • Chloroform
  • Chromium (hexavalent)
  • Dibromochloromethane
  • Dichloroacetic acid
  • Radium%2C combined (-226 & -228)
  • Total trihalomethanes (TTHMs)
  • Trichloroacetic acid

Other Detected Contaminants

  • Barium
  • Bromoform
  • Chlorate
  • Chromium (total)
  • Dibromoacetic acid
  • Fluoride
  • Haloacetic acids (HAA5)
  • Molybdenum
  • Monobromoacetic acid
  • Monochloroacetic acid
  • Nitrate
  • Strontium
  • Vanadium

Reminder

Always take extra precautions, the water may be safe to drink when it leaves the sewage treatment plant but it may pick up pollutants during its way to your tap. We advise that you ask locals or hotel staff about the water quality. Also, note that different cities have different water mineral contents.

Sources and Resources

Layer 1
Layer 1
Layer 1
Layer 1