Layer 1

Is Webster Tap Water Safe to Drink?

Yes! Generally Safe to Drink*

LAST UPDATED: 7:47 pm, August 1, 2022
+

Table of Contents

Can You Drink Tap Water in Webster?

Yes, Webster's tap water is generally considered safe to drink as Webster has no active health based violations of the Safe Drinking Water Act (SDWA) that we are aware of. Other factors such as lead piping in a home, or low levels of pollutants on immunocompromised individuals, should also be considered, however. To find more recent info we might have, you can check out our boil water notice page, the city's water provider website, or Webster's local Twitter account.

According the EPA’s ECHO database, from April 30, 2019 to June 30, 2022, Webster's water utility, Mcwa, had 0 violations of the Safe Drinking Water Act. For more details on the violations, please see our violation history section below. This assessment is based on the Mcwa water system, other water systems in the city may have different results.

While tap water that meets the EPA health guidelines generally won’t make you sick to your stomach, it can still contain regulated and unregulated contaminants present in trace amounts that could potentially cause health issues over the long-run. These trace contaminants may also impact immunocompromised and vulnerable individuals.

The EPA is reviewing if it’s current regulations around pollutant levels in tap water are strict enough, and the health dangers posed by unregulated pollutants, like PFAS.

Water Quality Report for Webster Tap Water

The most recent publicly available numbers for measured contaminant levels in Webster tap water are in its 2020 Water Quality Report. As you can see, there are levels which the EPA considers to be acceptable, but being below the maximum allowable level doesn’t necessarily mean the water is healthy.

Lead in tap water, for example, is currently allowed at up to 15ppb by the EPA, but it has set the ideal goal for lead at zero. This highlights how meeting EPA standards doesn’t necessarily mean local tap water is healthy.

EPA regulations continue to change as it evaluates the long term impacts of chemicals and updates drinking water acceptable levels. The rules around arsenic, as well as, lead and copper are currently being re-evaluated.

There are also a number of "emerging" contaminants that are not currently. For example, PFAS (Per- and polyfluoroalkyl substances), for which the EPA has issued a health advisory. PFAS are called "forever chemicals" since they tend not to break down in the environment or the human body and can accumulate over time.

We recommend looking at the contaminants present in Webster's water quality reports, or getting your home's tap water tested to see if you should be filtering your water.

Webster Tap Water Safe Drinking Water Act Violation History - Prior 10 Years

Below is a ten year history of violations for the water system named Mcwa for Webster in New York. For more details please see the "What do these Violations Mean?" section below.

Is there Lead in Webster Water?

Based on the EPA’s ECHO Database, 90% of the samples taken from the Webster water system, Mcwa, between sample start date and sample end date, were at or below, 0.0032 mg/L of lead in Webster water. This is 21.3% of the 0.015 mg/L action level. This means 10% of the samples taken from Webster contained more lead.

While Webster water testing may have found 0.0032 mg/L of lead in its water, that does not mean your water source has the same amount. The amount of lead in water in a city can vary greatly from neighborhood to neighborhood, or even building to building. Many buildings, particularly older ones, have lead pipes or service lines which can be a source of contamination. To find out if your home has lead, we recommend getting you water tested.

No amount of lead in water is healthy, only less dangerous. As lead accumulates in our bodies over time, even exposure to relatively small amounts can have negative health effects. For more information, please check out our Lead FAQ page.

Are there PFAS in Webster Tap Water?

Currently, testing tap water for PFAS isn’t mandated on a national level. We do have a list of military bases where there have been suspected or confirmed leaks. There appears to be at least one military base - Rochester Readiness Center/AASF #2 - near Webster with suspected leaks.

With many potential sources of PFAS in tap water across the US, the best information we currently have about which cities have PFAS in their water is this ewg map, which you can check to see if Webster has been evaluated for yet.

Our stance is better safe than sorry, and that it makes sense to try to purify the tap water just in case.

What do these Violations Mean?

Safe Drinking Water Act Violations categories split into two groups, health based, and non-health based. Generally, health based violations are more serious, though non-health based violations can also be cause for concern.

Health Based Violations

  1. Maximum contaminant levels (MCLs) - maximum allowed contaminant level was exceeded.
  2. Maximum residual disinfectant levels (MRDLs) - maximum allowed disinfectant level was exceeded.
  3. Other violations (Other) - the exact required process to reduce the amounts of contaminants in drinking water was not followed.

Non-Health Based Violations

  1. Monitoring and reporting violations (MR, MON) - failure to conduct the required regular monitoring of drinking water quality, and/or to submit monitoring results on time.
  2. Public notice violations (Other) - failure to immediately alert consumers if there is a serious problem with their drinking water that may pose a risk to public health.
  3. Other violations (Other) - miscellaneous violations, such as failure to issue annual consumer confidence reports or maintain required records.

SDWA Table Key

Field Description
Compliance Period Dates of the compliance period.
Status Current status of the violation.
  • Resolved - The violation has at least one resolving enforcement action. In SDWIS, this indicates that either the system has returned to compliance from the violation, the rule that was violated was no longer applicable, or no further action was needed.
  • Archived - The violation is not Resolved, but is more than five years past its compliance period end date. In keeping with the Enforcement Response Policy, the violation no longer contributes to the public water system's overall compliance status. Unresolved violations are also marked as Archived when a system ceases operations (becomes inactive).
  • Addressed - The violation is not Resolved or Archived, and is addressed by one or more formal enforcement actions.
  • Unaddressed - The violation is not Resolved or Archived, and has not been addressed by formal enforcement.
show details
Health-Based? Whether the violation is health based.
Category Code
The category of violation that is reported.
  • TT - Treatment Technique Violation
  • MRDL - Maximum Residual Disinfectant Level
  • Other - Other Violation
  • MCL - Maximum Contaminant Level Violation
  • MR - Monitoring and Reporting
  • MON - Monitoring Violation
  • RPT - Reporting Violation
show details
Code A full description of violation codes can be accessed in the SDWA_REF_CODE_VALUES (CSV) table.
Contaminant Code A code value that represents a contaminant for which a public water system has incurred a violation of a primary drinking water regulation.
Rule Code Code for a National Drinking Water rule.
  • 110 - Total Coliform Rule
  • 121 - Surface Water Treatment Rule
  • 122 - Long Term 1 Enhanced Surface Water Treatment Rule
  • 123 - Long Term 2 Enhanced Surface Water Treatment Rule
  • 130 - Filter Backwash Rule
  • 140 - Ground Water Rule
  • 210 - Stage 1 Disinfectants and Disinfection Byproducts Rule
  • 220 - Stage 2 Disinfectants and Disinfection Byproducts Rule
  • 230 - Total Trihalomethanes
  • 310 - Volatile Organic Chemicals
  • 331 - Nitrates
  • 332 - Arsenic
  • 333 - Inorganic Chemicals
  • 320 - Synthetic Organic Chemicals
  • 340 - Radionuclides
  • 350 - Lead and Copper Rule
  • 410 - Public Notice Rule
  • 420 - Consumer Confidence Rule
  • 430 - Miscellaneous
  • 500 - Not Regulated
  • 111 - Revised Total Coliform Rule
show details
Rule Group Code Code that uniquely identifies a rule group.
  • 120 - Surface Water Treatment Rules
  • 130 - Filter Backwash Rule
  • 140 - Groundwater Rule
  • 210 - Stage 1 Disinfectants and Disinfection Byproducts Rule
  • 220 - Stage 2 Disinfectants and Disinfection Byproducts Rule
  • 230 - Total Trihalomethanes
  • 310 - Volatile Organic Chemicals
  • 320 - Synthetic Organic Chemicals
  • 330 - Inorganic Chemicals
  • 340 - Radionuclides
  • 350 - Lead and Copper Rule
  • 400 - Other
  • 500 - Not Regulated
  • 110 - Total Coliform Rules
  • 410 - Public Notice Rule
  • 420 - Consumer Confidence Rule
  • 430 - Miscellaneous
show details
Rule Family Code Code for rule family.
  • 100 - Microbials
  • 200 - Disinfectants and Disinfection Byproducts Rule
  • 300 - Chemicals
  • 400 - Other
  • 500 - Not Regulated
show details

For more clarification please visit the EPA's data dictionary.

Webster Water - Frequently Asked Questions

HOW DO I CONTACT WEBSTER CUSTOMER SERVICE?
To contact customer service for the Webster water provider, Mcwa, please use the information below.
By Mail: 475 Norris Drive
ROCHESTER, NY, 14610
HOW TO PAY BILL FOR MCWA
Already have an account?

Existing customers can login to their Mcwa account to pay their Webster water bill by clicking here.

Want to create a new account?

If you want to pay your Mcwa bill online and haven't made an account yet, you can create an account online. Please click here to create your account to pay your Webster water bill.

Want to pay without an account?

If you don't want to make an account, or can't remember your account, you can make a one-time payment towards your Webster water bill without creating an account using a one time payment portal with your account number and credit or debit card. Click here to make a one time payment.

HOW TO START & STOP WEBSTER WATER SERVICE
Starting Your Service

Moving to a new house or apartment in Webster means you will often need to put the water in your name with Mcwa. In order to put the water in your name, please click the link to the start service form below. Start service requests for water bills typically take two business days.

Start Service Form

Want to create a new account?

Leaving your house or apartment in Webster means you will likely need to take your name off of the water bill with Mcwa. In order to take your name off the water bill, please click the link to the stop service form below. Stop service for water bills requests typically take two business days.

Stop Service Form

The estimated price of bottled water

$1.5 in USD (1.5-liter)

USER SUBMITTED RATINGS

Webster tap water
  • Drinking Water Pollution and Inaccessibility 23% Low
  • Water Pollution 41% Moderate
  • Drinking Water Quality and Accessibility 78% High
  • Water Quality 59% Moderate

The above data is comprised of subjective, user submitted opinions about the water quality and pollution in Webster, measured on a scale from 0% (lowest) to 100% (highest).

Related FAQS

Webster Water Quality Report (Consumer Confidence Report)

The EPA mandates that towns and cities consistently monitor and test their tap water. They must report their findings in an annual Consumer Confidence Report. Below is the most recent water quality report from Webster's Water. If you would like to see the original version of the report, please click here.

Monroe County

WaterMonroeAuthority County

Water Authority

2 0 1 0 A n n u a l

2020WatAnnualer

Water Quality Report

Qualit y

Repor t

MCWA Water Quality Summary Table

2020 Calendar Year Results -

 

 

Supply -

 

MCWA Production Water:

MCWA Purchased Water:

 

Water

 

 

 

 

SWTP & WWTP -

CWTP -

Rochester -

ECWA -

 

 

 

 

 

 

Quality

Detected Substances:

 

Source -

 

Lake Ontario

Well Field

Hemlock Lake

Lake Erie

Likely Source:

 

 

Violation:

 

 

(Source Type)

 

(Surface Water)

(Groundwater)

(Surface Water)

(Surface Water)

 

 

 

Units

MCLG

MCL

 

 

Range of detected values:

 

 

Yes or No

Barium

mg/L

2

2

0.019

- 0.023

0.1 - 0.11

0.017

0.021

Erosion of natural

No

deposits

 

 

 

 

 

 

 

 

 

 

Chloride

mg/L

NA

250

22

- 29

48 - 68

37 - 39

21 - 24

Naturally occurring

No

Fluoride

mg/L

NA

2.2

0.5 - 1

0.11 - 0.14

0.08 - 0.78

0.58 - 0.8

Natural and additive -

No

promotes strong teeth

 

 

 

 

 

 

 

 

 

 

Nitrate

mg/L

10

10

0.21

- 0.39

ND

0.25

0.32

Erosion of natural

No

deposits

 

 

 

 

 

 

 

 

 

 

Perfluorohexanesulfonic acid

ng/L

NS

NS

ND - 2

ND

ND

ND

Used to manufacture

No

textiles

 

 

 

 

 

 

 

 

 

 

Perfluorooctanesulfonic acid

ng/L

NS

10

2.5

- 2.8

ND

ND

ND

Used to manufacture

No

textiles

 

 

 

 

 

 

 

 

 

 

Perfluorooctanoic acid

ng/L

NS

10

ND - 2.2

ND

ND

ND

Used to manufacture

No

textiles

 

 

 

 

 

 

 

 

 

 

Sodium

mg/L

NA

NS

14

- 17

46 - 100 *

19 - 21 *

12 - 14

Naturally occurring

No

Sulfate

mg/L

NA

250

25

- 28

48 - 52

12

20 - 21

Naturally occurring

No

Turbidity - Turbidity is a measure of cloudiness of the water. Turbidity has no health effects. MCWA monitors turbidity because it is a good indicator of the effectiveness of our filtration systems and water quality. State regulations require that turbidity must always be below 1 NTU in the combined filter effluent. The regulations also require that 95% of samples collected from the entry point have measurements below 0.3 NTU and the highest monthly average for distribution system samples be below 5 NTU. Averages, annual ranges and lowest monthly percentages are listed.

Turbidity - Entry Point

NTU

NA

TT

0.04 (0.02 - 0.09)

NR

0.06 (0.04 - 0.1)

0.1 (0.04 - 0.18)

Soil Runoff

No

100% < 0.3 NTU

100% < 0.3 NTU

100% < 0.3 NTU

 

 

 

 

 

 

 

Turbidity - Distribution

NTU

NA

5

7 - 11/19/2020

0.88 - 7/30/2020

7 - 11/19/2020

0.88 - 7/30/2020

Soil Runoff

No

Microbial Pararmeters - No more than 5% of monthly samples can be positive. The highest monthly % positive and number of samples is listed.

 

 

 

Total Coliform Bacteria

NA

0

TT

0.39% - November

2.86% - March

0.39% - November

2.86% - March

Naturally occurring

No

2 samples

1 sample

2 samples

1 sample

 

 

 

 

 

 

Source Water Microbial Pathogens - The highest positive month and number of samples is listed. In our treatment processes, Cryptosporidium is removed / inactivated through a combination of filtration and disinfection or by disinfection alone.

Cryptosporidium

Cysts/L

0

TT

WWTP - 1 (March)

NR

ND

ND (2017)

Naturally occurring

No

1 Sample

 

 

 

 

 

 

 

 

 

Disinfectant and Disinfectant By-products (DBPs) - Chlorine has a MRDL (Maximum Residual Disinfectant Level) and MRDLG (MRDL Goal) rather than an MCL and MCLG (Averages and ranges are listed). For the DBPs (Total Trihalomethanes and Haloacetic Acids) the annual system average, range for all locations, and highest locational running annual average for all locations are listed.

Chlorine Residual - Entry Point

mg/L

NA

MRDL = 4

1.15 (0.78 - 1.38)

0.84 (0.71 - 1.1)

0.84 (0.71 - 1.1)

1.49 (1.29 - 1.64)

Additive for control of

No

0.77 (0.46 - 0.97)

microbes

 

 

 

 

 

 

 

 

Chlorine Residual - Distribution

mg/L

NA

MRDL = 4

0.55 (ND - 1.83)

0.53 (ND - 1.27)

0.55 (ND - 1.83)

0.53 (ND - 1.27)

Additive for control of

No

microbes

Key Terms Used In Water Quality Table

MCL = Maximum Contaminant Level, the highest level of a

contaminant that is allowed in drinking water. MCLs are set as close to the MCLGs as possible.

MCLG = Maximum Contaminant Level Goal, the level of a

contaminant below which there is no known or expected risk to health. MCLGs allow for a margin of safety.

MRDL = Maximum Residual Disinfectant Level, the highest level of a disinfectant allowed in drinking water. There is convincing evidence that addition of a disinfectant is necessary for control of microbial contaminants.

MRDLG = Maximum Residual Disinfectant Level Goal, the level of a drinking water disinfectant below which there is no known or expected risk to health. MRDLGs do not reflect the benefits of the use of disinfectants to control microbial contamination.

LRAA = Locational Running Annual Average - The annual average contaminant concentration at a monitoring site.

pCi/L = picoCuries per liter

  1. = Treatment Technique, a required process intended to reduce the level of a contaminant in drinking water.

AL = Action Level, the concentration of a contaminant which, if exceeded, triggers treatment or other requirements which a water system must follow.

ND = Not Detected, absent or present at less than testing method detection level. All testing methods are EPA approved with detection limits much less than the MCL.

NA = Not applicable NR = Not Required NS = No standard

mg/L = milligram (1/1,000 of a gram) per liter = ppm = parts per million

µg/L = microgram (1/1,000,000 of a gram) per liter = ppb = parts per billion

ng/L = nanogram (1/1,000,000,000 of a gram) per liter = ppt = parts per trillion

NTU = Nephelometric Turbidity Unit, a measure of water clarity.

CWTP = Corfu Water Treatement Plant. SWTP = Shoremnt Water Treatement Plant. WWTP = Webster Water Treatment Plant. MCWA = Monroe County Water Authority Rochester = City of Rochester

ECWA = Erie County Water Authority

Monroe County Water Authority 475 Norris Drive Rochester, New York 14610

2020 Annual Water Quality Report

PWSID# 2701047

PWSID# 1800547

PWSID# 3401158

MCWA

MCWA Genesee

MCWA RICHMOND

The Monroe County Water Authority

is pleased to provide you this report on the quality of your drinking

water which describes its sources, treatment and test results.

Total Trihalomethanes (TTHMs)

µg/L

NA

80

34.7 (16 - 58)

40 (18 - 63)

34.7 (16 - 58)

40 (18 - 63)

Byproduct of water

No

Max. LRAA = 46.5

Max. LRAA = 53

Max. LRAA = 46.5

Max. LRAA = 53

chlorination

 

 

 

 

 

Haloacetic Acids (HAAs)

µg/L

NA

60

9.7 (ND - 22)

10.7 (3.1 - 23)

9.7 (ND - 22)

10.7 (3.1 - 23)

Byproduct of water

No

Max. LRAA = 14.8

Max. LRAA = 11.5

Max. LRAA = 14.8

Max. LRAA = 11.5

chlorination

 

 

 

 

 

Lead and Copper - 90% of samples must be less than the Action Level (AL). The 90th Percentile, the number of samples exceeding the AL, and the range of results are listed. (2018 Monitoring period)

 

Copper - Customer Tap Samples

mg/L

1.3

AL = 1.3

0.160 (None)

0.110 (None)

0.160 (None)

0.110 (None)

Corrosion of household

No

0.005 - 0.200

0.005 - 0.240

0.005 - 0.200

0.005 - 0.240

plumbing

 

 

 

 

 

Lead - Customer Tap Samples

µg/L

0

AL = 15

7.2 (Two)

3.0 (One)

7.2 (Two)

3.0 (One)

Corrosion of household

No

ND - 29

ND - 76

ND - 29

ND - 76

plumbing

 

 

 

 

 

* There is no MCL set for sodium in water. However, EPA recommends that water containing more than 20 mg/l of sodium should not be used for drinking by people on severely restricted sodium diets. Water containing more than 270 mg/l of sodium should not be used for drinking by people on moderately restricted sodium diets.

Unregulated Contaminant Monitoring (UCMR4) - Every few years the USEPA issues a new list of up to 30 unregulated contaminants for which public water systems must monitor. This provides baseline occurrence data that the EPA combines with toxicological research to make decisions about future drinking water regulations. MCWA monitor for the fourth list from 2018 - 2020. For more information on this process go to https://drinktap.org/Water-Info/Whats-in-My-Water/Unregulated-Contaminant-Monitoring-Rule-UCMR.

Alcohols, Indicators,

 

Entry Points:

Lake Ontario Supplies -

Purchased Water Supplies -

Groundwater Supply -

Water Quality

Metals, Pesticides, SVOCs,

 

 

 

 

 

 

 

 

Violation:

and Cyantoxins:

Units

MCL

SWTP

WWTP

Rochester

ECWA

CWTP

Yes or No

 

Manganese

µg/L

NA

ND

ND

 

ND

3.5 (0.77 - 6.3)

8.0 (6 -10)

NA

Bromide

µg/L

NA

36.3 (36 - 37)

36 (34 - 37)

ND - 22

NR

NR

NA

Total Organic Carbon

mg/L

NA

2.3 (2 - 2.4)

2.2 (1.9 - 2.3)

2.48 - 2.68

NR

NR

NA

HAA Groups:

Distribution System:

 

 

Combined System Summary:

 

 

Total HAA (5)

µg/L

60

 

 

14.1 (0.74 - 31)

 

 

No

Total HAA (6) Br

µg/L

NA

 

 

7.4 (ND - 12)

 

 

NA

Total HAA (9)

µg/L

NA

 

 

21

(7.4 - 42)

 

 

NA

Bromochloroacetic acid

µg/L

NA

 

 

2.2

(ND - 4.4)

 

 

NA

Bromodichloroacetic acid

µg/L

NA

 

 

3.1

(ND - 5.9)

 

 

NA

Chlorodibromoacetic acid

µg/L

NA

 

 

1 (ND - 1.6)

 

 

NA

Dibromoacetic acid

µg/L

NA

 

 

0.5

(ND - 1.4)

 

 

NA

Dichloroacetic acid

µg/L

NA

 

 

6 (0.74 - 15)

 

 

NA

Trichloroacetic acid

µg/L

NA

 

 

7.5 (ND - 15)

 

 

NA

Compounds Tested For But Not Detected

Benzene

Toluene

Carbaryl

Ethoprop

Bromobenzene

1,2,3-Trichlorobenzene

Dalapon

Oxyfluoren

Bromochloromethane

1,2,4-Trichlorobenzene

Di(2-Ethylhexyl) Adipate

Profenofos

Bromomethane

1,1,1-Trichloroethane

Di(2-Ethylhexyl) phthalate (DEHP)

Tebuconazole

n-Butylbenzene

1,1,2-Trichloroethane

Dicamba

Permethrin, cis & trans

sec-Butylbenzene

Trichloroethene

Dieldrin

Tribufos

tert-Butylbenzene

Trichlorofluoromethane

Dinoseb

Butylated hydroxyanisole

Carbon Tetrachloride

1,2,3-Trichloropropane

Diquat

o-Toluidene

Chlorobenzene

1,2,4-Trimethylbenzene

Endothall

Quinoline

Chloroethane

1,3,5-Trimethylbenzene

Glyphosate

1-Butanol

Chloromethane

Vinyl Chloride

Hexachlorobenzene

2-Methoxyethanol

2-Chlorotoluene

o-Xylene

Hexachlorocyclopentadiene

2-Propen-1-ol

4-Chlorotoluene

m, p-Xylene

3-Hydroxycarbofuran

Monobromoacetic acid

Dibromomethane

Total Xylene

Methomyl

Monochloroacetic acid

1,2-Dichlorobenzene

Alachlor

Metolachlor

Tribromoacetic acid

1,3-Dichlorobenzene

Aldicarb

Metribuzin

1, 4-Dioxane

1,4-Dichlorobenzene

Aldicarb sulfoxide

Oxamyl (vydate)

N-ethyl Perflurooctanesulfonamidoacetic acid

Dichlorodifluoromethane

Aldicarb sulfone

Perchlorate

N-methyl Perflurooctanesulfonamidoacetic acid

1,1 Dichloroethane

Atrazine

Picloram

Perfluorobutanesulfonic acid

1,2-Dichloroethane

Carbofuran

Propachlor

Perfluorodecanoic acid

1,1-Dichloroethene

Chlordane

Simazine

Perfluorododecanoic acid

cis-1,2-Dichloroethene

Dibromochloropropane

2, 3, 7, 8-TCDD (Dioxin)

Perfluoroheptanoic acid

trans-1,2-Dichloroethene

2, 4-D

Antimony

Perfluorohexanoic acid

1,2-Dichloropropane

Endrin

Beryllium

Perfluorononoic acid

1,3-Dichloropropane

Ethylene Dibromide

Chromium

Perfluorotetradecanoic acid

2,2-Dichloropropane

Heptachlor

Cyanide

Perfluorotridecanoic acid

1,1-Dichloropropene

Heptachlor Epoxide

Mercury

Perfluoroundecanoic acid

1,3-Dichloropropene(cis)

Lindane (gamma-BHC)

Nickel

Total Microcystin

1,3-Dichloropropene(trans)

Methoxychlor

Nitrite

Microcystin-LA

Ethylbenzene

p,p’ DDD

Selenium

Microcystin-LF

Hexachlorobutadiene

p,p’ DDE

Silver

Microcystin-LR

p-Isopropyltoluene

p,p’ DDT

Thallium

Microcystin-LY

Methyl Tert-butyl ether (MTBE)

PCB’s Total

Zinc

Microcystin-RR

Methylene Chloride (Dichloromethane)

Pentachlorophenol

Surfactants (Foaming Agents)

Microcystin-YR

n-Propylbenzene

Toxaphane

Giardia Lamblia

Nodularin

Styrene

2, 4, 5-TP (Silvex)

Germanium

Anatoxin-A

1,1,1,2-Tetrachloroethane

Aldrin

alpha-Hexachlorocyclohexane

Cylindrospermopsin

1,1,2,2-Tetrachloroethane

Benzo(a)pyrene

Chlorpyrfos

 

Tetrachloroethene

Butachlor

Dimethipin

 

For more information on MCWA’s monitoring program call Customer Service at 585-442-7200.

M O N R O E C O U N T Y W A T E R A U T H O R I T Y

M C WA S TAT I S T I C S

When your water has been sitting for several hours, you can minimize the potential for lead

Abundant. Inexpensive. Pure.

The Monroe County Water Authority is the third largest water supplier in New York State, producing and delivering an average of 20 billion gallons of drinking water every year. As a public

Public Authorities Law, our sole purpose is to provide you with

Many communities have been unable or unwilling to make the investments necessary to maintain their water systems. That’s not the case with the Monroe County Water Authority. In 2020 we invested $20.82 million in infrastructure improvements. Our

are below the national average and the lowest 25% for northeast U.S. suppliers. It costs an average Authority residential customer about $27 a month for all the water they need.

The Monroe County Water Authority’s 215 employees are dedicated to providing you all the clean, safe drinking water you need, whenever you need it.

This annual water quality report is being provided to all of our customers in

compliance with U.S. Environmental Protection Agency (USEPA) and New York State Department of Health regulations. For more information check our website at www.MCWA.com.

Source and Treatment

Our primary water source is Lake Ontario which is treated at our Shoremont Plant in Greece and our Webster Plant in Webster. We also operate the Corfu Plant, a small well supply in the Village of Corfu, and purchase water from the City of Rochester and the Erie County Water Authority (ECWA). The Service Area Map in this report shows the typical service area for each of the treatment plants. The boundaries between the service areas change day to day as we manage the sources to optimize water delivery to our customers.

The New York State Health Department has evaluated the susceptibility of water supplies statewide to potential contamination under the Source Water Assessment Program (SWAP). In general, the Great Lakes sources used by Shoremont and ECWA are not very susceptible because of the size and quality of the Great Lakes. Hemlock and Canadice Lakes, used by the Hemlock Plant, are also not very susceptible because of their size and controlled

-

ture of the aquifer provides protection against the few nearby potential contaminant sources. Because storm and waste water contamination are potential threats to any source water, the water provided to our customers undergoes rigorous treatment and testing prior to its delivery.

The Shoremont Plant and the purchased water producers all use a similar treatment

water and to provide the residual disinfectant that preserves the sanitary quality of the water as it travels from each plant to your home. Fluoride is also added to help prevent tooth decay.

with chlorine.

These water treatment plants are in full compliance with all New York State and USEPA operational and monitoring requirements.

For more information on the State’s Source Water Assessment plan and how you can help protect the source of your drinking water, contact MCWA Customer Service at (585) 442-7200 or visit our website at www.MCWA.com.

Water Quality

Last year, as in years past, your tap water met all State drinking water health standards. MCWA is proud to report that our system did not violate a maximum contaminate level or any other water quality standard. This report is an overview of last year’s water quality.

Drinking water sources (both tap and bottled water) include lakes, reservoirs, rivers and streams, springs and wells. As water travels over land or through the ground, it dissolves naturally occurring minerals and can pick up substances resulting from animal or human activity. Contaminants that may be present in untreated water include inorganic and organic chemicals, pesticides and herbicides, and radioactive and microbiological contaminants. In order to ensure that your tap water is safe to drink, the State and the USEPA established regulations that set limits on contaminant levels in water provided by public water systems. These limits are known as Maximum Contaminant Levels (MCLs). The regulations also specify testing, reporting, and toring program substantially exceeds USEPA and State Health Department requirements. Departments of health also review our operating and monitoring data for compliance and independently monitors our distribution system.

Some constituents we tested for were detected, but at levels well below the allowable MCL. It’s important to remember all drinking water, including bottled water, may reasonably be expected to contain at least small amounts of some contaminants.

The presence of contaminants does not necessarily indicate that the water poses a

obtained by calling the USEPA’s Safe Drinking Water Hotline at (800) 426-4791. Some people may be more vulnerable to disease-causing microorganisms or

pathogens in drinking water than the general population. Immuno-compromised persons such as chemotherapy patients, organ transplant recipients, people with HIV/AIDS or other immune system disorders, some elderly, and infants can be particularly at risk from infections. These people should seek advice from their health care providers about drinking water. EPA/CDC (U.S. Centers for Disease Control) guidelines on appropriate means to lessen the risk of infection by

WATER WITHDRAWN FROM LAKE ONTARIO

53.6 Million Gallons Per Day

 

 

AVER AGE SYSTEM USE

57 Million Gallons Per Day

 

 

 

6.36 Million Gallons Per Day

 

 

ANNUAL COST FOR

$327.31 Per Year

AVERAGE RESIDENTIAL CUSTOMER

 

 

 

POPULATION SERVED

778,373 Wholesale and Retail

 

 

NUMBER OF ACCOUNTS

187,745

 

 

MILES OF WATER MAINS

3,385

 

 

NUMBER OF FIRE HYDR ANTS

26,840

Cryptosporidium, Giardia, and other microbiological contaminants are available from the Safe Drinking Water Hotline (800) 426-4791 or the Monroe County Department of Public Health, 111 Westfall Road, Rochester, NY 14620, (585) 753-5057.

Cryptosporidium

Cryptosporidium is a microbial pathogen present in varying concentrations in many

In 2020, the MCWA analyzed a total of 16 source water samples for Cryptosporidium taken from Lake Ontario at our Shoremont and Webster water treatment plants. Cryptosporidium was detected in one raw water sample collected in March at the Webster water treatment plant. In our treatment processes at this plant Cryptosporidium is removed / inactivated by a combination of

MCWA encourages individuals with weakened immune systems to consult their health care provider regarding appropriate precautions to avoid infection. Ingestion of Cryptosporidium may cause cryptosporidiosis, an intestinal illness, and may spread through means other than drinking water. Person to person transmission may also occur in day care centers or other settings where handwashing practices are poor. For more information on cryptosporidiosis, please contact your local health department.

Lead in Drinking Water

If present, elevated levels of lead can cause serious health problems, especially for pregnant women, infants, and young children. There is no detectable lead in the water we deliver to your home. Lead in drinking water is primarily from lead-bearing materials and components associ- ated with service lines and home plumbing. Although our testing indicates this is not a problem for our customers, it is possible that lead levels at your home may be higher than at other homes in the community as a result of materials used in your home’s plumbing. The Monroe County Water Authority is responsible for providing high quality drinking water, but cannot control the variety of materials used in plumbing components.

cooking. If you are concerned about lead in your water, you may wish to have your water tested. Information on lead in drinking water, testing methods, and steps you can take to minimize ex- posure is available at www.mcwa.com/MyWater/LeadInDrinkingWater.aspx or from the USEPA’s Safedrinking Water Hotline (800-426-4791) and website (www.epa.gov/safewater/lead)..

Fluoride

MCWA is one of the many New York water utilities providing drinking water with a controlled,

water at an optimal level of 0.7 mg/L. To ensure optimal dental protection, the State Depart-

levels in your water were within 0.2 mg/L of the CDC’s recommended optimal level 99.5% of

FOR MORE INFORMATION

If you have questions about this report, your bill, or Monroe County Water Authority operations, call Customer Service at (585) 442-7200. To view the MCWA Board of Directors meeting schedule, visit us online at www.MCWA.com.

Taste and Odor

We are required to maintain a chlorine residual in the distribution system to prevent the growth of bacteria. To eliminate or reduce the taste of chlorine in your water, simply store tap

for this also.

Home Treatment Units

There are businesses that sell home treatment units by telling you water supplied by the Monroe County Water Authority is not safe. Save your money. The water we provide is consistently better than the drinking water regulations require and we can prove it.

Conservation

Lake Ontario provides an abundance of water to the communities we serve, and our custom-

treat and move the water to your houses. Therefore, conserving energy is helpful to providing clean, safe water to you.

Although our water rates are below the national average, no one wants to pay for

toilets promptly, replace washers when garden hoses start to drip, and water your lawn in the early morning. After 10 a.m. the sun’s heat draws water from the lawn through evapora- tion. When you water early, you can water less because more of the water is absorbed into

Printed on recycled paper

Contaminants


Monroe County Water Authority (MCWA)

EWG's drinking water quality report shows results of tests conducted by the water utility and provided to the Environmental Working Group by the New York Department of Health - Bureau of Public Water Supply Protection, as well as information from the U.S. EPA Enforcement and Compliance History database (ECHO). For the latest quarter assessed by the U.S. EPA (January 2019 - March 2019), tap water provided by this water utility was in compliance with federal health-based drinking water standards.

Utility details

  • Serves: 490000
  • Data available: 2012-2017
  • Data Source: Surface water
  • Total: 19

Contaminants That Exceed Guidelines

  • Bromodichloromethane
  • Chloroform
  • Chromium (hexavalent)
  • Dibromochloromethane
  • Dichloroacetic acid
  • Nitrate
  • Total trihalomethanes (TTHMs)
  • Trichloroacetic acid

Other Detected Contaminants

  • Atrazine
  • Barium
  • Bromoform
  • Chlorate
  • Fluoride
  • Haloacetic acids (HAA5)
  • Molybdenum
  • Monobromoacetic acid
  • Monochloroacetic acid
  • Strontium
  • Vanadium

Reminder

Always take extra precautions, the water may be safe to drink when it leaves the sewage treatment plant but it may pick up pollutants during its way to your tap. We advise that you ask locals or hotel staff about the water quality. Also, note that different cities have different water mineral contents.

Sources and Resources

Layer 1
Layer 1
Layer 1
Layer 1